Eurol Geo-max 10w-40 godkänd av flera lastbilstillverkare
MAN
SCANIA
MERCEDES
MACK
Fully synthetic UHPD motor oil, based on low SAPS technology
Eurol Geo-Max 10W-40
is a fully synthetic motor oil for commercial vehicles based on so called ’low SAPS’ technology. This entails that sulphur, phosphorus and sulphated ash concentrations are reduced radically to protect the exhaust gas after treatment systems.
Eurol Geo-Max 10W-40 is applicable to a wide range of modern trucks, because it meets a wide performance spectrum.
Eurol Geo-Max 10W-40 can also be used for engines without a diesel particle filter.
Eurol Geo-Max 10W-40 has fuel economy properties and because of the special additive technology, both the oil and the engine are kept clean in an unprecedented way. In Euro-4, Euro-5 and Euro-6 engines, the harmful exhaust gas emission is reduced.
Eurol Geo-Max 10W-40 is a so called ’long drain’ oil and is therefore suitable for prolonged drain intervals, if allowed by the OEM and depending on working conditions and filtration methods, so it reduces maintenance costs.
Eurol Geo-Max 10W-40 can also be applied in older trucks with Euro-3 engines, where ACEA E4, Mercedes 228.5, DAF HP-2 and MAN 3277 are prescribed, as well Renault RXD in countries where diesel with a low sulphur content is used.
läs mer i produktbladet nedan.
godkännande
E100121_Approval MAN M3477 M3575 Eurol Geo-Max 10W40
E100121_Eurol Geo-Max 10W-40_MB228-51_2023-10-18
E100121_Eurol Geo-Max 10W-40_Scania Low Ash_2020-03-06
E100121_Eurol Geo-Max 10W-40_VDS 4-Mack EO-N premium plus-RLD3_2020-06-21
PERFORMANCE
MB 228.51
MAN M 3477
Volvo VDS-4
MAN M 3575
API CJ-4
ACEA E4
ACEA E6
ACEA E7
ACEA E9
MB 228.31
MAN M 3271-1
Volvo VDS-3
Scania Low Ash
Renault RLD-3
Renault RLD-2
Caterpillar ECF-3
CES 20081
MTU type 3.1
MTU type 2.1
MB 235.28
Detroit Diesel DDC 93K218
Mack EO-O PP
Mack EO-N Premium Plus
JASO DH-2
Voith Class B
Deutz DQC IV-10-LA
TYPICAL PROPERTIES
Density at 20°C | 0.8608 kg/l |
Viscosity, kinematic at 100°C | 14.3 cSt |
Viscosity, kinematic at 40°C | 94.7 cSt |
Viscosity Index | 156 |
Viscosity, dynamic (CCS) | 6040 cP |
Sulphated ash | 0.99 wt% |
Flash point | 195 °C |
Pour point | -39 °C |
Recensioner
Det finns inga recensioner än.